I am an Electrical Engineering senior at California State University, Long Beach, graduating in May 2027
I am interested in electronics, electrical hardware design, PCB development, and multidisciplinary system integration. My work has focused on engineering projects involving LV and HV electrical systems, controls, testing/troubleshooting, and technical documentation.
I serve as the Electrics Lead for CSULB Formula SAE, where I lead five electrical subgroups supporting development of the team's electric vehicle.
My work includes:
- 12 V grounded low-voltage safety and shutdown systems
- PCB development
- Wire harness design and electrical integration
- BSPD and TSAL development
- Cooling-pump PID control
- BMS and charging-system integration
- HV fuse-box development
- Electrical BOM management and component selection
- Integration planning for a 508 V accumulator system rated to 180 A
- Coordination with mechanical and vehicle subsystem leads
I also organize technical training and manufacturing activities for SAE members.
Featured Projects Raspberry Pi 4 Home Router & Network Test Platform
Designed, configured, and deployed a Linux-based home router using a Raspberry Pi 4, TP-Link Omada EAP650 Wi-Fi 6 access point, and Gigabit Ethernet switch.
The project included:
- DHCP and DNS configuration
- IPv4 forwarding and NAT
- nftables firewall configuration
- Static network addressing
- Wired and wireless performance testing
- Troubleshooting and system validation
- A 31-page reproducible engineering lab guide
Project: raspberry-pi-router
Documentation of technical leadership, manufacturing education, and outreach activities completed through CSULB SAE.
Topics include:
- Formula SAE electrical leadership
- MIG and TIG welding workshops
- Manufacturing safety and process selection
- Technical training for SAE members
- Manufacturing coordination between Formula SAE and Baja SAE
Project: engineering-leadership-outreach
- Electronics and hardware design
- PCB design and development
- Embedded systems
- Power distribution
- Electrical system integration
- Hardware testing and validation
- Controls
- Electric vehicle systems
- Linux-based embedded systems
Design & Simulation: KiCad, LTspice, MATLAB/Simulink, RapidHarness, AutoCAD Programming: C/C++, Python, MATLAB, VHDL Hardware: Raspberry Pi, Arduino, FPGA, oscilloscopes, multimeters Systems: Linux, embedded control, PWM, PID control, electrical troubleshooting
I am currently preparing for full-time and new-grad electrical engineering opportunities beginning in 2027, particularly roles involving:
- Electrical hardware
- Electronics design
- PCB development
- Embedded hardware
- Test and validation
- Electrical system integration
Connect With Me