indigo-domotics

The SolvisSmartHomeServer enables Solvis heating systems to change setpoints and read measurements.

Indigo plugin: bridge ESPHome devices into Indigo over the native API (port 6053). Finds them by mDNS, no MQTT needed. One Indigo device per node — switch, light, fan, cover, sensor, climate and lock. Also does OTA firmware upload and encrypted API connections.

A worked example of an Indigo energy dashboard — vendor-neutral and configurable, with a script that works out the hourly running cost of each device. Built with Claude Code.

Talk to your Indigo home automation in plain English. Claude gets live access — 167 tools to control devices, read sensors, write scripts, inspect triggers and schedules, track energy and cost, work out what caused a device change, and diagnose faults. Every answer checked against your running server, not guessed.

Indigo plugin — creates proper Indigo devices for Z-Wave sensors not yet recognised by Indigo; motion, contact, temperature, humidity, energy and more via raw Z-Wave command parsing

BETA — Indigo plugin for Honeywell Vista alarm panels over an Envisalink EVL3, EVL4 or EVL5. Reads ready, armed, alarm and zone status, and arms and disarms the panel from Indigo. Tested against real Vista 20P hardware.

Indigo plugin with two halves: it logs state changes for any device or variable you point it at, and it fires direction-filtered group triggers when a whole set of devices turns on or off. One subscription replaces a pile of per-sensor triggers and scripts.

Indigo plugin that watches an appliance's power draw to work out when a cycle starts and finishes — washing machine, dishwasher, tumble dryer, oven, or anything else that reports watts. Reports peak power, energy and cost per cycle, alerts by Pushover or email, and warns when the meter itself goes wrong.

Direct local-network control of Shelly Gen 2, 3 and 4 devices from Indigo. No cloud and no MQTT — the plugin talks to each Shelly over your LAN, and the Shellys push state changes straight back through a built-in webhook listener. Twelve device types covering 38 models.

Indigo plugin for RAMSES-ESP USB gateway — local Honeywell Evohome control via RAMSES-II radio, no cloud dependency

Indigo Domotics plugin for Zengge / Magic Home WiFi LED controllers, also sold as Magic Hue, FVTLED and LEDENET. Direct local control, no cloud and no app. Native Indigo dimmer with the standard colour picker, discovery by MAC so a DHCP move cannot break it, built-in patterns, plus plugin-driven fades, drift and sunrise.

RETIRED — the hardware was sold in July 2026 and this plugin is no longer in use here. Kept as source. Indigo plugin for EcoFlow portable power stations (Delta and River series) over the EcoFlow cloud API — battery charge, solar input, charging state and per-device controls.

One Indigo device that owns your garage door — true position from two contact sensors, an escalating open alarm that knows whether anyone is home, custom events to hang your own actions off, and an optional presence-gated garage light. Ships read-only until you trust it.

Indigo plugin: native zigbee2mqtt bridge — finds lights, relays, sensors, covers, locks, TRVs, buttons, repeaters and the coordinator on its own. Fills in Indigo's battery and energy readings, pins device settings that would drift, tracks network health, manages firmware updates, and splits a sensor's extra readings into their own devices.

Indigo plugin for UniFi networks — per-AP health (CPU, memory, uplink speed, RF neighbours), WAN and ISP speedtest, client Wi-Fi-generation mix, firmware-pending alerts, and a best-practice config audit. Also does phone presence, with geofence fusion for a steadier home/away signal.

Indigo plugin comparing UK energy tariffs against your own consumption — eleven import tariffs including Tracker, Agile, Go, Cosy and Flux, four export tariffs, gas as well as electricity, and a daily energy-summary report.

Indigo plugin: monitors water leak sensor with Pushover + email alerts and confirmation retests

Indigo plugin: bridge Tasmota MQTT devices into Indigo Domotics as native device types (relays, energy plugs, sensors, lights, shutters, buttons)

Claude Code plugin for Indigo home automation development — six skills covering plugin development, the Indigo API, control pages, HTML dashboard pages, bulk plugin updates and SQL Logger debugging. Ships the full SDK reference and 16 example plugins.

Indigo plugin for Shelly Gen 1 legacy devices — basic relay and UNI ADC support over local HTTP, kept separate from ShellyDirect (Gen 2/3/4) for clarity