I have had overextrusion for prints

[ivelasquez2]

Describe the bug
Getting overextrusion on prints. Looking for a way to enable extrusion flow calibration besides snapmaker orca

To Reproduce
Steps to reproduce the behavior:

1. Have a multicolor print
2. Slicke on snapmaker orca
3. Import to webui
4. Print
5. Last layer is bumpy and doesn't look as smooth as stock behavior regardless of number of colors.
6. If I run the same print with the multiace disabled (just as a basic 4 print head) then print comes out fine

Expected behavior
Print comes as smooth as stock in the same settings.

Screenshots

Desktop (please complete the following information):

• OS: windows10
• Browser firefox
• Version latest

Smartphone (please complete the following information):
N/A

[decay71]

HI,

I cannot tell from the description alone. Please send me both files, from the same slicing run:

The unprocessed slicer export, the one that printed fine
The file the web preflight made from exactly that export, the one that printed badly

Then I can list line by line what multiACE changed.

[ivelasquez2]

GCodeFiles.zip

Attached are the files. The long named one is a working one sliced by base snapmaker firmware not its a bit larger cause it has more than 1 model. The other 2 are the files I got with multiace enabled the first is just the plain gcode sliced from snapmaker orca it does not include bed level or extrusion flow calibration. Before is the raw file exported from snapmaker orca and the after is the file after sent through we flight ui it includes mesh box checked.

I hope this is helpful. If not let me know and I can try to make the files more similar. I have an event today and was a bit on a rush so the base working file is not 1:1 with the others cause I need to print some models for in person sales 😅

[ivelasquez2]

Accidental closure

[ivelasquez2]

Final prints please note the rough extrusion lines for the black and the top surface. The other piece is a stopped print where the mid section is shown to be very bumpy as well.

[decay71]

Thank you, will check it this weekend, i am not at home this week