Dynaframe don't start

[klodespe]

Hi, thank you for your response.
I have just installed Dynaframe on RaspberryPi4 end another on RaspberryPi3.
In every case I have used a command in the "Code" page, but when I reboot Dynaframe don't start.

I looked in the log file and this is the sentence:

/home/pi/Dynaframe/run.sh: riga 14: ./Dynaframe: cannot execute: required file not found

How I can resolve?

[errorkallu]

same for me

[Lakiman7]

same for me

[Lakiman7]

I have tried with multiple versions of the OS on both the Raspberry Pi 3B+ and 4B, but the same error appears in the log: ./run.sh: line 23: ./Dynaframe: cannot execute: required file not found.

[SitzPatrick]

I used Raspberry PI OS (32-Bit ) and seem to work for after getting through the no usable libssl found error

[pbassut]

Same issue

[pbassut]

Figured it out.

Seems like it only works with this specific version of RaspiOS: 2020-08-24
Found it here

Also, has to be flashed with balenaEtcher and not Raspberry Pi Imager. You will then, need a mouse and keyboard.

[RazZziel]

I fixed the "cannot execute: required file not found" error on Raspberry Pi 5 by installing the following dependencies:

sudo dpkg --add-architecture armhf
sudo apt install libc6:armhf libstdc++6:armhf libicu76:armhf

However it shows nothing on screen